Fog Light Angle Adapters
When installing my fog lights to the existing holes on my tube bumper, the angle caused a problem since the lights are installed upside down. While the is an adjustment to angle them, there was no way to adjust them forward, so the pointed towards the ground and too much of an angle.
These adapters, one placed on the top and bottom of the mounting bracket, will straighten out the angle so your lights point horizontal with some room to adjust as needed.
Set of 4 included (2 for each light).
Printed in black PETG at 100% to ensure strength and durability.
When installing my fog lights to the existing holes on my tube bumper, the angle caused a problem since the lights are installed upside down. While the is an adjustment to angle them, there was no way to adjust them forward, so the pointed towards the ground and too much of an angle.
These adapters, one placed on the top and bottom of the mounting bracket, will straighten out the angle so your lights point horizontal with some room to adjust as needed.
Set of 4 included (2 for each light).
Printed in black PETG at 100% to ensure strength and durability.
When installing my fog lights to the existing holes on my tube bumper, the angle caused a problem since the lights are installed upside down. While the is an adjustment to angle them, there was no way to adjust them forward, so the pointed towards the ground and too much of an angle.
These adapters, one placed on the top and bottom of the mounting bracket, will straighten out the angle so your lights point horizontal with some room to adjust as needed.
Set of 4 included (2 for each light).
Printed in black PETG at 100% to ensure strength and durability.